Water Heating Specials

We specialize in hot water cylinder upgrade work (Electric, Gas, and Solar) and are very proud of the many installations we have completed in West Auckland over the many years in business.  By choosing us you will not be disappointed.

We are the right choice because:

  • There are no hidden costs or cutting corners (you can see our very happy customers’ feedback on No Cowboys, Google, or our Testimonials page).
  • The cost will be fixed via an emailed quote after clear communication with you after the site visit.
  • To ensure full compliance and understanding an on-site visit will be completed before any cylinder mains pressure upgrade/gas upgrade work starts.
  • Our tradesmen are fully qualified and employed full time by us (no subcontractors like a lot of cylinder Installation Companies).
  • Our cylinder and gas bottle slabs are installed with concrete below for support (these support a lot of weight and need to be installed well to help prevent sinking, most others just lay a pre-made slab on the ground).
  • We are trade qualified to complete some electrical work required (you will be advised at the site visit or in the quote before works start if an electrician is needed due to additional works required, we may not be able to quote this but can provide an estimate).

Paul McCallum (Certifying Plumber/Gasfitter 25+ years) 

Contact Allpoints Plumbings to discuss your situation and your options.

Option 1: 135L Low-Pressure H.W.C Replacement.

Supply and install 1 x new 135L Low-Pressure hot water cylinder in your existing cylinder location.

Includes:

  • Removal (from site) and disposal of old H.W.C.
  • Supply and installation of new Rheem 135l H.W.C (common sizing). Re-using existing valves and piping. Some piping alterations included to fit new H.W.C and seismic restraints included.
  • Seismic restraints.

Price $1,300 plus GST ($1,495.00 including GST)

Contact Allpoints Plumbings to discuss your situation and your options.
*Water Heating Specials Conditions apply.  We warranty all our works.

Option 2: 180L Mains Pressure Replacement or Upgrade.

Supply and install 1 x new 180l Rheem Mains Pressure hot water cylinder in your existing cylinders location. West Auckland only

Includes:

  • Removal (from site) and disposal of old H.W.C.
  • Sealing of any old roof penetration.
  • Supply and installation of 180l Mains Pressure H.W.C (model 31218015) and all necessary valves.
  • Installation complying with current plumbing codes and manufactures recommendations.
  • Seismic restraints.
  • Relief drains (as required).
  • Converting low to mains pressure tapware, 1 x bathroom only.

Price $2,100 plus GST ($2,415.00 including GST)

Contact Allpoints Plumbings to discuss your situation and your options.
*Water Heating Specials Conditions apply.  We warranty all our works.

Option 3: 180L Mains Pressure External Cylinder Relocation

Supply and install 1 x new 180l Therman Mains Pressure hot water cylinder externally outside your house..

Includes:

  • Removal (from site) and disposal of old H.W.C.
  • Sealing of any old roof penetration.
  • Supply and installation of 180l Mains Pressure H.W.C (model 9507966) and all necessary valves.
  • Installation complying with current plumbing codes and manufactures recommendations.
  • Seismic restraints.
  • Converting low to mains pressure tapware 1 x bathroom only.
  • Setting up a concrete pad for the cylinder to sit on.

Price $2,250 plus GST ($2,587.50 including GST)

Contact Allpoints Plumbings to discuss your situation and your options.
*Water Heating Specials Conditions apply.  We warranty all our works.

Option 4: Instant Gas Water Heater Install.

Supply and install 1 x Rinnai A26 instant gas water heater (external) on twin L.P.G gas bottles piped back to your existing plumbing system. The water heater must be located above gas bottles and a maximum of 5 meters each of hot/cold water and gas piping allowed for this price to apply.  If you have mains gas, please call us to discuss.

Includes:

  • Removal (from site) and disposal of old H.W.C.
  • Sealing of any roof penetration.
  • Concrete pavers for gas bottles and organize delivery if required.
  • Supply of auto change regulator and chains for gas bottles.
  • Supply and installation of 1 x Rinnai A26 Instant gas water heater to suit requirements.
  • Installation complying with current plumbing codes and manufactures recommendations.
  • Converting low to mains pressure tapware 1 x bathroom only.
  • Gas compliance certificate.
  • All our external piping is tidy/straight and fitted by welded copper piping to last in the harsh N.Z elements (not crimped copper or plastic). If you are looking at another company’s quote/cost ask if they do the same?

Price $2,500 plus GST ($2,875.00 including GST)

Contact Allpoints Plumbings to discuss your situation and your options.
*Water Heating Specials Conditions apply.  We warranty all our works.

Note; There are certain locations that this type of heater can and cannot be installed. There may not be a suitable location on your building.  We offer a free site visit to make sure that this is a good option for your specific installation. Ideally a clear external wall space near the kitchen/bathroom at least 1000mm long between any openings (windows/doors) and access to below the house.

Option 5: Replace an existing instant gas water heater

Supply and install 1 x Rinnai A26 Instant gas water heater to replace an existing instant gas water heater in the same location.

Includes:

  • Removal (from site) and disposal of the old water heater.
  • Supply and installation of Rinnai A26 of required gas type.
  • New pipe connections.
  • Gas compliance certificate.

Price $1,500 plus GST ($1,725.00 including GST)

Contact Allpoints Plumbings to discuss your situation and your options.
*Water Heating Specials Conditions apply.  We warranty all our works.